Comments for BG Pictures Photography - Tampa Wedding Photography, Wedding Photographer, Commercial Photography, Event Photography » Tampa Wedding Photographer Clearwater St. Petersburg Commercial Engagement Photography http://bgpictures.com Wedding, Commercial, and Portrait Photography Fri, 10 Feb 2012 16:59:48 +0000 hourly 1 http://wordpress.org/?v=3.3.2 Comment on HP Z3100 Drive Belt Replacement How-To Video by Bryan Glynn http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1722 Bryan Glynn Fri, 10 Feb 2012 16:59:48 +0000 http://bgpictures.com/?p=5516#comment-1722 I have no idea, I have never had those errors. All I know is every single person that has written me with errors after the install broke something or tested improperly. I have no idea, I have never had those errors. All I know is every single person that has written me with errors after the install broke something or tested improperly.

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Alison http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1720 Alison Fri, 10 Feb 2012 08:47:42 +0000 http://bgpictures.com/?p=5516#comment-1720 As far as I'm aware everything went back on ok and I did test with it fully assembled with the lid down. I've got the printer to work even though I had the both errors. I've done all the paper calibrations and the ICC profiles and it takes the paper in no problem and its working fine. I did find some info on line yesterday that someone else had the same 58.11 error and they said their printer is working fine with this error too. So I'll just have to keep my eye on it. Do you think it'll be ok to use? As far as I’m aware everything went back on ok and I did test with it fully assembled with the lid down. I’ve got the printer to work even though I had the both errors. I’ve done all the paper calibrations and the ICC profiles and it takes the paper in no problem and its working fine. I did find some info on line yesterday that someone else had the same 58.11 error and they said their printer is working fine with this error too. So I’ll just have to keep my eye on it. Do you think it’ll be ok to use?

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Bryan Glynn http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1719 Bryan Glynn Fri, 10 Feb 2012 03:35:46 +0000 http://bgpictures.com/?p=5516#comment-1719 The only things I can think of are something got broken during the process, or installed incorrectly. Or you aren't testing fully assembled with the lid down. The only things I can think of are something got broken during the process, or installed incorrectly. Or you aren’t testing fully assembled with the lid down.

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Alison http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1718 Alison Thu, 09 Feb 2012 09:20:18 +0000 http://bgpictures.com/?p=5516#comment-1718 Hi Bryan I'd firstly like to say what a fantastic video you did! I had an electrical engineer to replace the belt on my HP Z2100 and I've tried to do the calibrations that you stated on the video but I've come across 2 errors. 1st: Carriage Assembly, it gets as far as: Point 22 The Front Panel then prompts you to enable the Color Sensor (ESP) - do i want to enable it. But my problem is it is already enabled! So I said no to this and then it came up with an error 58.11 Fail. I tried doing it again and it still came up as enabled so I said to dis-enabled it and I came up with the same error. I thought I'd do the other calibrations (in order even though the 1st one failed) and it was ok on Scan Axis but when I came to the Line Sensor Calibrations I got this: 2nd: Line Sensor Calibration, it gets as far as: Point 5. The Printer will start to calibrate the Line Sensor position to the Black Printhead. The printer will print a line of black dots and then scan them: All it does is print the dots then cut the paper and then it came up with an Error 2 - Fail. The Sensor test and the cutter test came up ok. Do you have any idea what I need to do, I ugently need to get this back up and running. Your help will be much appreciated? Hi Bryan

I’d firstly like to say what a fantastic video you did!

I had an electrical engineer to replace the belt on my HP Z2100 and I’ve tried to do the calibrations that you stated on the video but I’ve come across 2 errors.

1st: Carriage Assembly, it gets as far as:
Point 22 The Front Panel then prompts you to enable the Color Sensor (ESP) – do i want to enable it. But my problem is it is already enabled! So I said no to this and then it came up with an error 58.11 Fail. I tried doing it again and it still came up as enabled so I said to dis-enabled it and I came up with the same error.

I thought I’d do the other calibrations (in order even though the 1st one failed) and it was ok on Scan Axis but when I came to the Line Sensor Calibrations I got this:

2nd: Line Sensor Calibration, it gets as far as:
Point 5. The Printer will start to calibrate the Line Sensor position to the Black
Printhead. The printer will print a line of black dots and then scan them: All it does is print the dots then cut the paper and then it came up with an Error 2 – Fail.

The Sensor test and the cutter test came up ok.

Do you have any idea what I need to do, I ugently need to get this back up and running. Your help will be much appreciated?

]]> Comment on A Private Party at Châteaux Dobson by dobson http://bgpictures.com/2012/01/15/private-party-at-chateaux-dobson/comment-page-1/#comment-1705 dobson Mon, 23 Jan 2012 01:16:37 +0000 http://bgpictures.com/?p=7212#comment-1705 Awsome Pictures, great work thank you. Awsome Pictures, great work thank you.

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Bryan Glynn http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1701 Bryan Glynn Mon, 16 Jan 2012 20:05:03 +0000 http://bgpictures.com/?p=5516#comment-1701 Yes. It's not hard to find check any big fabric store, it' common for sewing machines. Yes. It’s not hard to find check any big fabric store, it’ common for sewing machines.

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Pat http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1700 Pat Mon, 16 Jan 2012 20:03:34 +0000 http://bgpictures.com/?p=5516#comment-1700 I have been looking all over for the synthetic oil you mention for the carriage assy pole but i can't find it. Is is absolutely necessary to use synthetic oil only? I have been looking all over for the synthetic oil you mention for the carriage assy pole but i can’t find it.

Is is absolutely necessary to use synthetic oil only?

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Richard C http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1692 Richard C Wed, 04 Jan 2012 06:57:33 +0000 http://bgpictures.com/?p=5516#comment-1692 Well, I guess I wasn't looking at the manual close enough until now because I see the page that has the re-installing of the carriage rear bushing. And unfortunately, it seems like I have to take everything apart again... sigh. Oh well, thanks to your video, it won't be too bad. Again, thanks for your help. Rich Well, I guess I wasn’t looking at the manual close enough until now because I see the page that has the re-installing of the carriage rear bushing. And unfortunately, it seems like I have to take everything apart again… sigh. Oh well, thanks to your video, it won’t be too bad. Again, thanks for your help.

Rich

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Richard C http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1691 Richard C Wed, 04 Jan 2012 06:50:49 +0000 http://bgpictures.com/?p=5516#comment-1691 Bryan, thank you so much for this informative video. My carriage belt started to crack and left residue on my prints. Your video saved me big time! Couple questions on the carriage install. While I was putting in the carriage, the 'carriage rear bushing' (diagram on page 194, part #5) fell out and broke in two. Would you know the purpose of this little piece and could it cause the initialization from failing? Would I have to take out the carriage once again to put this little piece in or could it done a different way. Thanks for the great help you're providing for the HP Z printer community. Rich Bryan, thank you so much for this informative video. My carriage belt started to crack and left residue on my prints. Your video saved me big time!

Couple questions on the carriage install. While I was putting in the carriage, the ‘carriage rear bushing’ (diagram on page 194, part #5) fell out and broke in two. Would you know the purpose of this little piece and could it cause the initialization from failing? Would I have to take out the carriage once again to put this little piece in or could it done a different way.

Thanks for the great help you’re providing for the HP Z printer community.
Rich

]]> Comment on HP Z3100 Drive Belt Replacement How-To Video by Bryan Glynn http://bgpictures.com/2011/03/11/hp-z3100-drive-belt-replacement-how-to-video/comment-page-1/#comment-1645 Bryan Glynn Mon, 12 Dec 2011 13:43:23 +0000 http://bgpictures.com/?p=5516#comment-1645 As noted, it's extremely similar for all the versions. This is all I have. As noted, it’s extremely similar for all the versions. This is all I have.

]]>